I thought I'd start with the drivers door. As it doesn't seem to be that bad ... so it should be easy for me to do.

How the driver door appeared before I started ...

Sand down the rust bubbles and spots, also took off some of the layers of spraybomb paint I've applied over the years ...

I used Tremclad Rust Paint, in a Flat Black color.

Went to Rondex and had a Spraybomb made up and applied the Green paint.

I only did the lower half of the door, as I wanted to see how it would turn out. Maybe I'll come back and try clean up the top-half of the door. Next thing on my list, and has been on my list for 4 or 5 years now .... is the TAIL-LIGHT PANEL!

Page 1 2 3

Backyard Bodywork Main Page